Tuesday, December 28, 2010

VDC Technology Manager - Tocci Building Corporation - Boston

Tocci Building Corporation has been implementing Virtual Design & Construction (VDC) since 2006. We’ve moved past the BIM basics (clash detection, quantity extraction and logistics) and are well on our way to total transformation of the way our company executes work. We are expanding our team to support current projects, pave the way for new utilizations of BIMs (like field layout, code checking, prefabrication, and 3D printing) and define new project relationships under IPD contracts.

We are seeking a person to become our VDC Technology Manager in our VDC Department.

This department creates building models (BIMs) to be used in preconstruction and construction, as well as supports the use of those models. Although we’re receiving Revit models from design team members on most projects, model clean-up is usually required to actually use models for construction. Most model clean-ups or 2D conversions are done in a team, comprised of internal team members or design team members. Models are created with actual construction use in mind: quantity extraction, coordination, additional documentation and direct-from-model execution.

Position Description:

The VDC Technical Manager is a key position in Tocci’s VDC Department, responsible for the management of Tocci’s VDC software and technical standards.

The department current uses Revit Architecture/MEP, Bentley Navigator, Bentley Projectwise, Solibri, Navisworks, Manage, AutoCAD MEP, and other VDC software programs. The VDC Technical Manager is a user of all of these software programs, so that each can be supported and optimized. Because new VDC software comes out every day, a key part of the VDC Technical Manager position is testing new software programs and functionality to make sure we are using the best out there.

The VDC Technical Manager’s time is split approximately 50/50, spending half-time on standards, software testing and management and the other half-time on project work.

You need to be self motivated, detail-oriented, open-minded and a dedicated individual that has an intuitive sense of the constraints and opportunities relating to VDC. Successful candidates will be prepared to emotionally engage with Tocci and its projects. The position is based in Woburn, MA, but travel to job sites and partner offices for co-location throughout the country (mostly in the Northeast) is required as needed. You will report to the VDC Manager.

Essential Duties and Responsibilities:
  • Maintain Revit templates, standards and libraries
  • Develop and maintain Bentley workspaces and DGN libraries
  • Maintain graphic standards manual and perform QAQC on department/project deliverables
  • Create training materials and conduct training sessions
  • Test and implement new software tools and technologies
  • Develop internal capabilities for 3D printing, CNC equipment, RFID tracking and tagging holographic printing and other emerging technologies
  • Stay up to date on software features; train team on new features and how to appropriately use them
  • Work on projects, performing tasks including:
    • Work on teams developing and Coordinating BIMs
    • Collaborate with design professionals to co-create models and perform quality assurance/quality control checks on BIMs
    • Work with cost engineering staff to develop accurate and easy-to-use quantity takeoffs
    • Work with project managers to optimize schedules through visual scheduling
    • Develop supplemental field documents for superintendents
    • Develop photorealistic renderings and walk-throughs directly from building models
    • Work with project managers and superintendents to update models to reflect as-built conditions
  • Understand and promote Tocci’s VDC process through internal and external training and presentations
  • Perform other tasks related to Virtual Construction implementation
  • Participate in general office “chores” including:
    • emptying the dishwasher
    • moving boxes
    • decorating the Christmas tree
    • re-stocking soda in the fridge.
Tocci is very much a family, so we all pitch in.

Qualifications:
  • Minimum Bachelors degree in architecture or construction related field or equivalent work experience
  • 3+ years in building or design industry required; work experience with VDC or BIM using Revit desirable
  • Preference will be given to candidates who are Registered Architects or Registered Engineers.
  • Exposure to and experience with Building Information Model (BIM) systems (i.e. Autodesk Revit , Bentley BIM, ArchiCAD) required
  • Individuals with experience using non-Revit software programs will be prepared to transition to Revit
  • Must be organized and slightly OCD (Obsessive Compulsive Disorder)
  • Excellent technical skills, including using computers, the internet and file sharing required
  • Strong personal management skills, dedication, organization and open-minded required
  • Creative thinker with ability to work in a close knit environment with like minded personalities
  • LEED AP preferred, but not required
Please submit resume, references, and salary history to: Laura Handler via EMAIL

Laura Handler, Director of Virtual Design and Construction

A bit more about Tocci
Tocci Building Companies is a progressive construction services firm providing construction management, design/build, real estate development and preconstruction services. Tocci is housed in a restored 19th century mill building that blends old-world charm and contemporary design. Tocci staff members are dedicated professionals who work hard but relax together at weekly breakfasts, monthly lunches and occasional cocktail parties. Tocci provides a supportive business environment, competitive salary, and excellent benefits package. Equal Opportunity Employer

Tuesday, December 21, 2010

Several Opportunities via Johnson Recruitment - Middle East

Revit Opportunities: Abu Dhabi, Doha and Saudi Arabia.

We, Johnson Recruitment, represent several opportunities in the Middle East for Revit users of differing specialities and seniority. Our client is leading the way in Revit deployment and is rolling it out across three new offices in 2011. World class Revit specialists are needed to help with deployment, implementation, programming and training.

In addition to excellent work experience in the required disciplines, you will need:
  • At least 3 years live project experience using Revit
  • Strong 2010 proficiency, ideally 2011.
A high salary with benefits is offered, as well as the choice to be employed on a contract or a permanent basis.

These are the available opportunities:
  • Revit MEP specialist: (1 Position available) - To help implement Revit, training, mentoring, working on live projects and providing support as, when and where necessary.
  • Revit Structure specialist: (1 position available) - To help implement Revit, training, mentoring, working on live projects and providing support as, when and where necessary.
  • Revit Architecture specialist: (1 position available) - To help implement Revit, training, mentoring, working on live projects and providing support as, when and where necessary.
  • Revit API Programmers (2 positions available)
  • BIM Coordinators (2 positions available)
If you are interested in any of these, please email your CV to Jack Johnson and he will respond immediately.

Wednesday, November 17, 2010

Revit Application Developer - CO

The Prescient Companies would like to find a developer with experience with the Revit API to help them with a project. They need someone with experience managing content and interacting between all three versions of Revit. They aren't committed to a specific programming language at this point so your skills and ability to help them determine the best one to use will be important.

The project is a contract position but the right person might find a permanent home. The project could be completed off-site for the most part but a visit to Denver, Colorado might be necessary to get things started.


If you are interested and want to learn more please contact Michael via EMAIL.

Thursday, November 4, 2010

Design Applications Technician - Perkins & Will - Dallas, TX

Perkins+Will is well along in our transition into a Building Information Modeling (BIM) design and delivery process, with over 100 BIM projects completed or in progress to date. This role is your point of entry to join our progressive IT Organization’s Design Applications Team in supporting Revit Architecture and other BIM tools, legacy CADD applications, as well as other visualization/presentation production applications.


You will provide direct level 1,2 and 3 technical support to our exceptionally talented and motivated architects, interior designers, planners and graphic design professionals. You will connect closely with project teams to understand their projects and their needs. You must bring a passion for projects, people, customer service and teaching to this role. Expect to engage all scale of projects from short duration single office interiors engagements to multi‐office, multiyear major healthcare projects in your technology support role. You will routinely deliver training. Some travel will be required from time to time in support of offices other than your own.

Creative, innovative thinking within the bounds of Firmwide standards is often necessary to address the diversity of project types, team structures and project goals you will encounter at Perkins+Will. To keep your skills sharp, the firm will invest in your continuous professional development. Among the professional development challenges we may place before you will be LEED accreditation, professional licensure (if applicable) and acquisition of a Certified Document Technician (CDT) credentials. Continued development of your skills in our core applications will be a priority. You are ultimately responsible to the Firmwide Design Applications Manager, but may report directly to a regional or local office Design Application Manager. In addition to what’s described above, the candidate we seek fits the following profile:

  • You must have excellent collaborative and organizational skills. You will be expected to learn the resources of the IT Organization and the Firm, and to engage them when you need assistance or special expertise. The ability to document and prepare materials for training and orientation will be expected of you.
  • You must have demonstrated mastery of Revit Architecture, including ability to administer, install, configure, setup, customize, etc. A basic ability to provide support or experience providing support must be apparent. Past project experience is a plus, but not necessarily sufficient.
  • Familiarity with AutoCAD Architecture (ADT) and some hands‐on use experience is required. You must clearly present a good understanding of ADT/AutoCAD: what it is, how it works, etc., leading to an ability to support it.
  • Experience with Navisworks, Ecotect, 3D Studio MAX/VIZ, Mental Ray, VRay, animation, and advanced rendering techniques is highly desirable.
  • Other non‐Autodesk systems experience and knowledge (e.g. SketchUp, Rhino, FormZ, ArchiCAD, Triforma & Generative Components) is a plus.
  • Experience with Project Information Management Tools such as Newforma is highly desirable. Familiarity with similar solutions such a Projectdox and Buzzsaw is a plus.
  • In certain instances/locations, you must have basic hardware and networking diagnostic skills or at least a demonstrable aptitude for so doing.
  • You will be expected to provide at least light support for the Microsoft Windows/Office desktop and Adobe Creative Suite products, with particular emphasis on PowerPoint, Acrobat Pro, Photoshop, In Design and Illustrator out of your experience using those applications.
  • Support for plotting software and digital publishing is also expected of you.
  • years experience in an architectural/interiors/planning or similarly oriented practice environment.
  • The minimum of an Associate degree in an Architectural Technologies is required; BS Arch, BArch or MArch is desired.

Qualified applicants should apply at CAREERS at Perkin+Will.

Thursday, October 28, 2010

Revit Specialist Looking for a New Challenge - Charlotte, NC

A friend, Rodney Fiallo, is currently interested in a new opportunity with a firm that is in need of a Revit go to person. The ideal position is a demanding one that requires his skills with Revit as well as related software. He is located in the Charlotte area of North Carolina and he'd like to stay there but he realizes the right opportunity might lie elsewhere.


You can download his RESUME and contact him with the information provided therein.

Tuesday, October 19, 2010

Revit Specialist - Lionakis - Sacramento

Lionakis is looking for a Revit Specialist to work in their Sacramento office. Relocation is an option for the right person.
Education and Skill Requirements:
  • 5+ years production experience in design, drafting, or engineering
  • AA degree in architecture or related fields
  • Revit Structure experience strongly preferred
  • Ability to use time productively, maximize efficiency, and meet challenging work goals
  • Must have basic PC experience in Windows environments, working knowledge of word processing, spreadsheets, email, web enabled applications, and database software.
Essential Functions of Revit Specialist role

Software:
  • Manage software products including but not limited to incorporating new version releases and customization of the product
  • Manage the implementation of supporting software for BIM
  • Evaluate new BIM software and technologies
  • Stay informed on best practices for the use of Revit Architecture and BIM
  • Stay informed on other BIM software and interface with Revit
  • Installation and support of related BIM software
Standards:
  • Maintenance of the software template files to assure standards
  • Provide support for plotting and electronic file submissions
  • Automate routines in BIM to support standards and productivity
  • Provide quality control for completeness and adherence to company standards of all shop drawings produced
  • Assist in developing and enforcing BIM documentation and work flow process standards
Support:
  • Provide hardware and network support as it relates to BIM production
  • Support the BIM technology needs of our satellite offices
  • Trouble shoot problems
  • Liaison with corporate technology support staff
Training:
  • Internal Training: Provide Revit Architectural fundamentals and Intermediate training to staff
  • Conduct internal continuing education Revit Architectural training sessions
  • Provide technical orientation to New Hires regarding BIM tools
  • Test new hire skills in BIM
  • Maintain high level of competency of software through continued use and training
Project Interface:
  • Assist project teams in BIM project setup
  • Create Revit families in response to project needs
  • Help resolve BIM design issues
  • Manager and distribute coordinated digital documents to the project team
  • Coordinate hardware upgrades with IT
  • Communicate with subcontractors to receive, coordinate, and update all electronic models
Liaison for BIM process:
  • Future planning for potential use of BIM
  • Sustainable Design
  • Planning
  • 3D Renderings
  • Facilities Management
  • Cost Estimating
  • Specification Management
  • Integrated Project Delivery
  • Digital Prototyping and Digital Fabrication
  • Modularization
Involvement with Industry Organizations:
  • Autodesk University
  • AUGI
  • Local User Groups
EOE m/f/d/v

APPLY ONLINE

Tuesday, October 5, 2010

Architectural Application Expert - Salt Lake City

A leading reseller of Autodesk CAD products has an immediate opening for an Architectural Application Expert and training instructor in the Salt Lake City area. This position will focus on Revit but will include working with AutoCAD, Navisworks, and AutoCAD Architecture as well. The position will have several duties but the main responsibility will be classroom and customized training. Other duties consist of pre-sales demonstrations and consulting as well as post-sales support and implementation consulting.

Requirements
• 2 years experience with relevant Autodesk products
• Relevant industry experience a plus
• Strong communication and presentation skills
• Customer relation skills
• Be a problem solver with a "get it done" attitude and strong self-motivation attributes
• Have high standards for yourself and your work
• LEED Accredited preferred

We are well established in the CAD industry, being in business 25 years and an Autodesk reseller for 19 years. Salary and benefits are negotiable, depending on experience.

How to Apply
Send your resume and salary requirements to revitae@hotmail.com. Please reference Arch AE in the subject line.

Tuesday, September 28, 2010

Project BIM Leader - NBBJ San Francisco

Since 1943, leading global architecture and design firm, NBBJ, has helped companies and organizations create innovative places. From state-of-the-art healthcare and research facilities, to top-performing world headquarters, NBBJ has designed communities, buildings, environments and digital experiences that enhance people’s lives. The firm has twelve offices worldwide, including Seattle, San Francisco, Los Angeles, Columbus, New York, Boston, London, Dubai, Beijing, Shanghai, Hong Kong and Moscow.


NBBJ San Francisco – whose primary markets are Healthcare, Science/Higher Education, and Housing – is seeking a Project BIM Leader to lead successful coordination of BIM production and coordination at a project level using Revit Architecture. The position will offer the candidate opportunities to grow within the firm and exposure to an innovative, fast-paced and highly collaborative environment.

Skills and Qualifications
  • B. Arch. or equivalent degree required; M. Arch. preferred.
  • Expert level knowledge of Autodesk’s Revit Architecture required.
  • Previous experience using Revit in the delivery of large, complex projects.
  • 7-12 years experience in architectural industry; experience with Virtual Design and Construction Methods / BIM.
  • Ability to communicate and present design ideas to a variety of audiences.
  • Highly proficient with Navisworks, 3DMSMax, Sketch-Up, Rhino, Grasshopper, or other graphic design tools and associated workflows.
  • Experience with parametric or scripted modeling a plus.
  • Experience with Autodesk related programming languages also desired.
Role and Responsibilities
  • Participate in BIM set-up, standards and coordination process on projects.
  • Provide day to day guidance and mentoring to less experienced team members to optimize Revit features and follow project modeling standards.
  • Participate in technological collaboration between project team members, client, architect, builder, consultants, subcontractors, etc.
  • Facilitate the exchange and coordination of the 3D model with consultants and contractor/fabricators.
  • Establish early standards for data exchange with entire Project Team to optimize use of the BIM for scheduling, quantity take-off, estimating, etc. during all stages of the project.
  • Lead the development of standard families and detail libraries of blocks, groups, curtainwall, casework, etc.
  • Work directly with NBBJ Firmwide Design Technology Team (DT) regarding BIM process standards, technology support and training.
  • This position reports to and receives direction from the Project Manager and Studio Core Team.
To apply online please see our WEBSITE.

NBBJ is an equal opportunity employer.

Friday, August 27, 2010

BIM Coordinator - DesignGroup - Columbus, OH

DesignGroup is an award winning architecture and planning firm located in Columbus, Ohio and is a nationally recognized Best Firm to Work For and leader in sustainability. Since 2009, 100% of our work has been designed in a BIM Environment.


To support this transformation, we are searching for a BIM Coordinator. The BIM Coordinator will serve as a Subject Matter Expert for Revit Architecture and other digital design tools within our firm. The BIM Coordinator will support the Director of BIM, Architectural and Interior Design Teams on all projects from concept through construction leveraging a BIM workflow to maximize the team’s efficiency and use of the firm’s multiple design technologies. Responsible for content development and maintenance of the Revit Library, and for implementation of Revit Standards within project teams and will be the lead on BIM project work such as BIM conversion projects for owners, contractors and other consultants.

Successful candidates will demonstrate: excellent theoretical problem solving capabilities; a strong attention to detail and quality; the ability to manage multiple projects; motivation to develop and evolve the firms BIM related competitive advantages; and the ability to interact and mentor other team members in a thoughtful manner.

This position requires a Bachelor's degree in Architecture, Interior Design or equivalent, 3-5 years experience in design or construction practice with strong understanding of project workflows throughout the design, documentation and construction phases and expert knowledge and proven practical application of Revit Architecture and other BIM related software. Familiarity with additional design applications such as 3D Studio Max, SketchUP, NavisWorks , Ecotect, and Green Building Studio a plus.

To apply for this position, please visit our WEBSITE.

Wednesday, August 25, 2010

Studio Building Information Modeling Expert

The New York Studio of an International Architecture and Design firm is seeking a studio-based Building Information Modeling (BIM) expert, to lead successful coordination of BIM production and coordination at a project level. The position will offer the candidate opportunities to grow within the firm and exposure to an innovative, fast-paced and highly collaborative environment.

Required skills/attributes:

Technical
  • Minimum of seven (7) years experience in Architecture.
  • Bachelor of Architecture or equivalent degree required.
  • Expert level knowledge of Autodesk’s Revit Architecture.
  • Proven prior experience with large & complex project delivery using Revit.
  • In-depth knowledge of technology based collaboration systems.
  • Proven coordination process experience including working with consultants using multiple platforms.
  • Possess a deep knowledge in the Autodesk product range, including Revit Architecture, Revit MEP, Navisworks, 3DSMax and associated workflows.
  • Experience with Autodesk related programming languages a plus.
  • Previous experience in the design and delivery of complex healthcare projects preferred.
Personal
Ability to:
  • Work independently, and with minimal supervision.
  • Multi-task, work well under pressure and meet deadlines.
  • Ability to communicate and present ideas clearly to wide a wide audience – from project team members to external consultants and client representatives.
  • Enjoy working in a collaborative team environment.
Role and responsibilities
  • Participate in BIM set-up, standards and coordination process.
  • Participate in technological collaboration between project team members, client, architect, builder, consultants, subcontractors etc.
  • Facilitate the streamlining of the process of exchange and coordination of the 3D model with consultants and contractor/fabricators.
  • Work directly with NBBJ Firmwide Design Technology Team (DT) regarding BIM process standards, technology support and training.
  • Establish early standards for data exchange with entire Project Team to optimize use of the BIM for scheduling, quantity take-off, estimating etc during all stages of the project.
  • Participate in BIM Coordination meetings.
  • Participate in constructability reviews of the BIM.
  • Establish/maintain project files and standards.
  • Develop, discover, collect, and share processes, best practices and techniques.
  • Lead the development of standard families and detail libraries of blocks, groups, curtainwall, casework, etc.
  • Actively promote advanced and innovative BIM-based methodologies towards integrated practice.
This position reports to and receives direction from the Project Manager and Studio Core Team. You will provide day to day guidance and mentoring to less experienced team members to optimize Revit features and follow project modeling standards.

To apply, please send your detailed resume and portfolio sample (no more than 4M) via EMAIL . Note “Project BIM Coordinator” in the subject line.

Friday, August 20, 2010

Position Wanted - Revit Specialist - Denver, CO

Jeffrey Rath is currently "under-employed" as he put it. He's interested in a challenging position that requires his skills with design software, specifically Revit, but not necessarily just Revit. He is located in the Denver area of Colorado. He likes it there and wants to stay.


You can browse his resume and reach out to him via his contact information therein. You can also examine some rendering images of projects he's been a part of.

Thursday, August 12, 2010

Mechanical HVAC EIT or Designer - CT

Ted Eatman with Futures Consulting has a client with an immediate opening for a Mechanical Designer for their Norwalk, CT office.


Position requires a minimum of 2 years experience in designing HVAC systems for healthcare, laboratory, industrial or institutional facilities in a consulting environment. Qualifications include strong communication and interpersonal skills, and an above average ability to work in a fast-paced team environment with multiple deadlines. Revit experience is a MUST

They offer competitive compensation and benefits, a positive and supportive work environment and an opportunity to manage your career.

Please send resume via EMAIL to Ted Eatman.

Revit MEP Application Engineer - SC

Visually Intelligent Solutions (VIS), an Autodesk Reseller and Design Visualization solution provider in Rock Hill, SC, is seeking a Revit MEP Application-Engineer and Trainer with BIM/AEC Design expertise, to join our team for supporting our clients with advanced Autodesk CAD/BIM applications.


As a leader in 2D and 3D design, engineering, and entertainment software, VIS delivers an expanding product portfolio, helping users to continually innovate through the digital design, visualization, and simulation of real-world project performance. From architecture, manufacturing, transportation, and utilities to telecommunications, video games, television, and film, VIS customers are leading the 2D and 3D design world by improving their design processes through increased efficiency and productivity.

VIS is a growing Autodesk reseller serving the Carolinas/Georgia and recognized as a business focus technology leader, uniquely positioned to provide cutting edge visualization services and Autodesk software services to all industries. VIS is comprised of CAD and visualization professionals with extensive backgrounds in engineering and digital artistry who are dedicated to giving our clients the competitive edge. VIS also provides a variety of innovative digital solutions.

Overview of Responsibilities:

  • Providing technical support to customers on-site and via on-line systems
  • Training-coaching-consulting customers with Autodesk design software
  • Conducting product demonstrations to AEC firms and professionals
  • Developing VIS' expertise for Autodesk’s applications

Qualifications:
The candidate must be a self-motivated team player with strong BIM knowledge, industry knowledge and excellent communication skills. The following qualifications are desirable:

  • Excellent AEC/BIM knowledge and minimum 3 years experience
  • Capability and experience training-coaching users with Autodesk applications
  • Knowledge of these applications: Revit MEP, AutoCAD, Autodesk Vault & Navisworks
  • Capability of self-learning software and computer technology
  • Degree in Building Engineering, Architecture an advantage or equivalent experience

Compensation:
This is a contract position with the goal of evolving into full-time employment. Company will provide continuous career development and application training as necessary.

Role/Purpose
Application Engineers participate in all phases of the sales cycle by working closely with the sales team to demonstrate how Autodesk solutions help customers address issues and achieve business goals. The Application Engineers propose solutions based on their strong industry knowledge, in-depth product knowledge, and business acumen. They thoroughly understand the capabilities of the Autodesk solutions and the business benefits customers can realize by implementing those solutions. An Application Engineer functions as a trusted advisor to the customer.

Detailed Responsibilities of AE:

  • Communicates product features and benefits in pre-sales situations.
  • Present Autodesk products to prospective customers in the form of presentations. Presentations may be live, or via Web-delivery mechanisms. Also provides customer consultation, support and product presentations at industry specific trade shows.
  • Business Assessments of Customers.
  • Conducts assessments of customer's business processes and matches solutions to meet their needs.
  • Provides product demonstration assistance in customer facing events.
  • Conduct professional product presentations and demonstrations in large forums that are Autodesk sponsored in order to generate sales and meet revenue objectives.
  • Product Evangelist
AE will become an expert in spreading the product message. AE will convey a positive message to accounts and individuals who are looking for a solution but may not know which product will fit their needs the best. AE will also attempt to find a fit for their products in new environments. AE will enthusiastically assist customers to make the best decisions on the Autodesk solution that will meet their needs.

Please send your resume via EMAIL to Gary Rackliff. Serious candidates will be considered for a follow-up interview.

Thursday, August 5, 2010

Project Designer - CA

Project Designer, Electrical Engineering (San Diego)


Sparling, a "Best Place to Work" firm, is seeking a Project Designer, Electrical Engineering. This is a full-time position based in our San Diego office. Under the direction of the Project Manager, this individual will handle the design and modeling of electrical and technology systems in Building Information Modeling format, including AutoCAD and Revit. The Project Designer will research, prepare, and present coordinated design options and work with manufacturers and contractors to address challenges and develop practical designs.


Ideal candidates will have:
  • Strong command of design and modeling with Revit, AutoCAD MEP 2010, and Building Information Modeling.
  • Strong command of electrical and/or technology/low voltage design.
  • 1 or more year’s experience using Revit MEP 2009 or later.
  • Experience working with central files and linked models.
  • Understanding of family editing.
  • Experience with completely circuited and tagged power systems.
  • Bachelor's degree in Electrical Engineering.

Investments we make in our people:

  • Full group insurance benefits
  • Performance bonus
  • 17 paid days off to start, plus paid holidays
  • 401(k) with company contribution
  • Flexible spending plan
  • Paid professional association membership

Please visit our website to view our portfolio and our careers page to apply.

IT Support Specialist - CA

Design Technology/IT Support Specialist (San Diego)


Sparling, a "Best Place to Work" firm, is seeking a full-time IT/Design Technology Support Specialist in our San Diego office. This individual will provide technical assistance to staff members and maintain the firm's IT infrastructure, while also supporting production throughout the firm to provide timely and accurate CAD deliverables and BIM models. This position includes: providing technical support, network and system administration, content creation & maintenance, quality assurance, production support, and the need to continually maintain/expand technical skills.


Ideal candidates will have:

  • Two years of post-high school education, plus a minimum of 4 years professional hands on experience in network administration and end user support for Microsoft Windows & Microsoft Office, Microsoft networks, and PC hardware, or equivalent combination of education and experience.
  • 5+ years of relevant experience or equivalent combination of education and experience in supporting design technology software such as AutoCAD and Revit.
  • Excellent working knowledge of recent versions of design software; in particular, AutoCAD MEP and Revit MEP.
  • Ability to perform typical server administration skills, including operating systems software patching and upgrades and maintenance of hardware.
  • Knowledge of basic network router and switch equipment configuration and troubleshooting.
  • Knowledge of LAN/WAN networking standards and protocols, including DNS, TCPIP, WINS, DHCP.
  • Outstanding prioritization, organizational, and multi-tasking skills with ability to manage a diverse blend of tasks.
  • Excellent communication and interpersonal skills with ability to interact successfully with a diverse range of personality types.

Investments we make in our people:

  • Full group insurance benefits
  • Performance bonus
  • 17 paid days off to start, plus paid holidays
  • 401(k) with company contribution
  • Flexible spending plan
  • Paid professional association membership

Please visit our website to view our portfolio and our careers page to apply.

Tuesday, July 27, 2010

Documentation Specialists (2-4) - Revit - TN

National hospitality design leader Hnedak Bobo Group is seeking to add two, possibly up to four, seasoned documentation professionals to our team of technical specialists in our Memphis office. Candidates must have a minimum of 5 years of project documentation experience that includes solid work history using Revit on large scale projects. Hospitality industry experience is preferred.


HBG is a 60 person firm based in Memphis. We are focused on life-style oriented projects including hospitality, entertainment resorts, and urban mixed-use projects. HBG’s perks include: a flexible work schedule, 100% paid health insurance, and our unique corporate structure. To learn more visit www.hbginc.com. Send letter of interest, resume and project history confidentially via email to Laura Nick.

Hnedak Bobo Group is an Equal Opportunity Employere (EOE)

Monday, July 19, 2010

CAD/BIM Coordinator - Maryland

Government Services IPT provides innovative multidisciplinary services to support the full life cycle of Government facilities and missions, helping our clients to fulfill their missions with proactive, creative, cost-effective solutions.


We are seeking professionals who understand our clients’ mission and programs, are responsive to client and associate needs, proactively embrace challenges, desire continued learning, and thrive in a team environment.

We are currently seeking a CAD/BIM Coordinator. The CAD/BIM Coordinator will be a member of the Design team, contributing billable work to projects in his or her discipline, while serving as the company’s CAD/BIM Subject Matter Expert.

Responsibilities: (will include, but not be limited to)
  • Serving as a member of project teams in the appropriate discipline.
  • Serving as Subject Matter Expert for CAD and BIM within the company.
  • Identifying and providing user training.
  • Managing annual CAD/ BIM budget and planning.
  • Providing project specific CAD/BIM review.
  • Working with IT to establish and implement processes, QC procedures, and standards related to CAD, BIM and related software.
  • Overseeing maintenance and updating of CAD/ BIM resource library.
  • Working with IT to evaluate new software and technology 
Minimum Qualifications:
  • Bachelor’s degree and 3 or more years experience in Architecture, Engineering, or related field.
  • Expert level of knowledge of BIM process.
  • Expert level of knowledge of AutoCAD and Revit software
  • Working knowledge of AutoCAD Architecture, Civil 3D, and MicroStation
Preferred Qualifications:
  • Experience overseeing CAD and/or BIM with an A&E firm
  • Some familiarity with federal government or military projects or programs
  • Familiarity with Bentley BIM
  • LEED AP
Government Services IPT is an Equal Opportunity/Affirmative Action employer. All applicants will receive consideration for employment without regard to race, color, religion, sex, national origin or other protected characteristic.  Government Services IPT is an E-Verify Employer. EEO/MF/DV/AA.

Please Apply Online

Wednesday, June 30, 2010

Revit Specialist - Colorado (Position Filled as of 08/04/10)

Neenan's Revit Specialist (Kelly Carlson) is moving on to greener pastures pursuing her architectural career (still with Neenan though) and they are looking for someone to take her place. If you are interested please Click here to apply


Summary:
The Revit Specialist is responsible for active, hands-on, assistance to Revit project teams. This will include developing processes, training material, and content, as well as teaching and providing expert advice to individuals and groups.

Primary Responsibilities:

General
  • Improve the quality, practice, and delivery of architecture to our clients
  • Work closely with the BIM Coordinator to understand systems and processes established
  • Maintain high level of competency of software through continued use and training
  • Find creative solutions to users problems through research and development
  • Attend approved conferences, seminars, and workshops for Revit
Training
  • Oversee the training of staff relating to Revit, with developed training processes
  • Provide mock project Revit training for new employees
  • Provide advanced training of mentors
  • Disseminate lessons learned information to staff
  • Conduct inter-office coordination meetings relating to Revit
  • Bring back learning from conferences and disseminating information to appropriate teams
  • Update internal Revit blog
Support Project Teams
  • Set up new files at the request of project teams
  • Monitor project files for conformance to standards and processes
  • Create project specific content at the request of project teams
  • Develop processes to assist project teams in tying LEED design provisions into Revit
Managing Standards and Libraries
  • Document and update standards and best practices
  • Monitor conformance to standards and processes
  • Maintain and upgrade templates and libraries
  • Maintain, organize, and continue to build the Revit content library
Periodic Support
  • Create upgrade and deployment strategies for Revit
  • Work with Autodesk to resolve major technical issues
Qualifications:
  • 3+ years of real world experience, preferably in a Revit Management capacity, using Autodesk Revit Architecture
  • Construction background preferred
  • LEED AP preferred
  • Experience in commercial/medical projects preferred
  • Revit Structure/MEP, Navisworks, AutoCAD, SketchUp and 3ds Max knowledge a plus
  • Communicate well, both verbally and in writing
  • Must have above average troubleshooting skills, strong analytical problem solving skills, and the ability to interpret technical questions
  • Have a special passion for Revit
  • Must be a Revit expert
  • Enjoy helping individuals and teaching groups
  • Understand basic design and building systems
  • Ability to understand all parts of Architectural Contract Documents
  • Experienced at leading and managing people
  • Care about quality

Sunday, June 20, 2010

Application Specialist - IDEATE - AEC

Ideate is Growing and looking for talented people.  Duties include training/consulting/and technical support for Autodesk's line of software. Background must include experience in the architectural, engineering, interiors, or construction professions utilizing AutoCAD, AutoCAD for Architects, Navisworks, and/or Revit Architecture/Revit Structure. Ideate’s focus is to find team members who know the architectural/engineering/construction profession very well with knowledge of the software, and presentation skills. The job also requires excellent writing, analysis, and verbal skills.


Summary of Responsibilities:
  • Provides technical product assistance to both inside and outside sales representatives in the development and closing of sales opportunities.
    • Pre-sales:  Qualifying Process
      • Technical audits
      • Needs assessment
      • Training assessment
      • Pre-Sales Presentations
    • Technical Alignment:  Development Process
      • To gain a competitive advantage
      • To set technical alignment and expectations
      • To remove technical obstacles
    • Post-sales: Retention & Referral Process
      • Training
      • Technical support
      • Implementation
      • Consulting services
      • Customer acquisition, satisfaction, and retention
  • Develops and conducts professional product presentations and demonstrations in small and large forums to generate sales and meet revenue objectives.
  • Remain up to date with technical knowledge on the entire product line.
  • Present products as advantages and benefits for customer’s needs.
  • Customize company-standard technical demos to specifically address customer needs.
  • In conjunction with sales team activities, proactively follow up with customer technical lead to provide additional information or answer specific technical questions.
  • Play a key role in further developing current accounts by identifying complete software/consulting solutions to meet additional unrealized customer needs.
  • Develop and implements pre- and post- sales detailed service products.
  • Instruct training classes in Autodesk products (AutoCAD, Navisworks, and vertical products (Revit)).
  • Support the success of customers by delivering technical training and product updates.
  • Partner with sales team to gain in-depth customer knowledge to increase product and services sales.
  • Provide technical presentations at events, user groups, customer sites, and over the internet.
Requirements:
  • BS in Architecture or Engineering with 2+ years practical experience, or equivalent
  • Knowledge of the Autodesk software product line
  • Experience in Ecotect a plus
  • Knowledge of software industry and the competitive posture of the company a plus
  • Proven track record of providing exceptional customer service and support to key customer accounts a plus
  • Ability to identify, and quantify, customer needs and new business opportunities
  • Ability to translate customer needs into product features.
  • Ability to establish and build healthy working relationships with partners, clients, vendors and peers
  • Excellent listening skills
  • Excellent presentation skills
  • Excellent oral communication skills
  • Excellent written communication skill
  • Excellent problem-solving ability
  • Excellent at managing multiple projects.  Show demonstrated project management experience.
 Additional Requirements:

Must be willing and able to travel as required to achieve objectives (specifically travel may be up to 2 trips per month (3-4 days each)). Must be willing and able to work within a team-selling environment as well as independently.

Apply via EMAIL.

Application Specialist AEC - IDEATE - MEP

Ideate is Growing and looking for talented people.  Duties include training/consulting/and technical support for Autodesk's line of software. Background must include experience in the architectural, engineering, interiors, or construction professions utilizing AutoCAD, AutoCAD for Architects, Navisworks, and/or Revit Architecture/Revit Structure. Ideate’s focus is to find team members who know the architectural/engineering/construction profession very well with knowledge of the software, and presentation skills. The job also requires excellent writing, analysis, and verbal skills.


Summary of Responsibilities:
  • Provide technical product assistance to both inside and outside sales representatives in the development and closing of sales opportunities.
    • Pre-sales:  Qualifying Process
      • Technical audits
      • Needs assessment
      • Training assessment
      • To be a evangelist for the implementation of MEP based software  (Revit MEP/AutoCAD MEP)
      • Technical Alignment:  Development Process
      • To gain a competitive advantage, To set technical alignment and expectations, To remove technical obstacles, To solidify the final piece of a relationship or build upon our value to assist in closure
      • Training, technical support, and installation services
    • Post-sales:
      • Retention
      • Referral Process
      • Implementation services
      • Customer satisfaction and retention
      • Technical Support
  • Provides competitive analysis of Company products vs. competitive products throughout the sales cycle.
  • Develops and conducts professional product presentations and demonstrations in small and large forums to generate sales and meet revenue objectives.
  • Remain up to date with technical knowledge on the Autodesk MEP product line (Revit MEP/AutoCAD MEP).
  • Presents products as advantages and benefits for customers.
  • Customizes company-standard technical demos to specifically address customer needs.
  • In conjunction with sales team activities, may be required to proactively follow up with customer technical lead to provide additional information or answer specific technical questions.
  • Plays a key role in further developing current accounts by identifying complete solutions to meet additional unrealized customer needs.
  • Develops and implements pre- and post- sales detailed service products.
  • Relays information back to product teams regarding new product enhancements, prioritizations, etc.
  • Instruct training classes in Autodesk MEP products (Revit MEP primary/AutoCAD MEP secondary).
  • Instruct training classes in secondary core competency software
  • Supports the success of customers by delivering technical training and product updates.
  • Partners with partner sales team to gain in-depth customer knowledge to increase product and services sales.
  • Provides technical presentations at trade shows and events.
  • May also have a focus on the sales process and sales development.
Requirements:
  • BS in Engineering with 4+ years practical engineering experience or equivalent
  • Knowledge of the Autodesk product line and understanding of the end-user applications a plus
  • Knowledge of software industry and the competitive posture of the company a plus
  • Proven track record of providing exceptional customer service and support to key customer accounts a plus
  • Ability to identify customer needs and new business opportunities
  • Ability to translate customer needs into product features.
  • Ability to negotiate and execute a variety of support agreements
  • Ability to establish and build healthy working relationships with partners, clients, vendors and peers
  • Ability to influence customers and partners
  • Excellent listening skills
  • Excellent presentation skills
  • Excellent oral communication skills
  • Excellent written communication skill
  • Excellent problem-solving ability
  • Excellent at managing multiple projects

Additional Requirements:
Must be willing and able to travel as required to achieve objectives (specifically travel may be up to 2 trips per month (3-4 days each)). Must be willing and able to work within a team-selling environment

Apply via EMAIL.

Friday, June 4, 2010

BIM - 3D Project Support Coordinator - Florida and Houston (revised)

Smith Seckman Reid, Inc. is an employee-owned engineering design and facility consulting firm with more than 500 employees in 13 offices across the United States. We provide a wide spectrum of consulting services related to facility and infrastructure design, operation, sustainable design and management. We deliver services for facilities nationwide, including healthcare, education, science and technology, research, sports and entertainment, government, corrections, infrastructure, commercial and industrial clients. The strength of our SSR team is our people and the shared belief that our culture makes this an extremely rewarding place to work.


SSR's Florida and Houston offices are in need of a Building Information Modeling/3D Project Support Coordinator. The BIM Project Support Coordinator is responsible for assisting in the development and implementation of the overall Building Information Modeling (BIM) process as it relates to software application and project support. Regularly engages with design teams to train staff, enhance project performance and generally support the users. Works diligently to improve the dynamics of the BIM initiative through testing and implementation of application upgrades.

An ideal candidate will be a technical school graduate with 8 years of related experience or a college graduate with 4 years of related experience.

For additional emails and to apply, visit our JOBS web site.

Revit Guru Available - Houston

[Update - He is no longer available]

David Baldacchino recently found himself on the awkward end of the much too frequent conversation for many people in this business, "We're sorry we have to let you go". Rather than dwelling on this as a setback he's looking forward to finding that next great firm. He wants to stay in Houston but he also realizes that a perfect opportunity might lie elsewhere. You can read his own post at his blog Do U Revit? I do.


With his energy, attitude and experience I just can't see him being available for too long. If your firm is looking for the right person to make a difference what are you waiting for?

Thursday, June 3, 2010

Project Leader - HMC Architects - Ontario, CA

HMC Architects is inviting exceptionally innovative, dynamic, and self-motivated individuals to join one of California’s most established architectural firms. HMC offers a unique opportunity for professionals who believe that design can change the world.

HMC Architects is an industry leader in planning and design for healthcare, education, and institutional projects in each of its ten offices in California, Nevada, and Arizona. We are a growing firm whose energies are dedicated to infusing each project with creativity and quality execution. We need creative thinkers with strong leadership and communication skills that embrace every opportunity to convey cutting-edge experience and motivation to both the project team and our clients.


HMC Architects is in search of a Project Leader for our Ontario office, who is looking for a firm culture that goes beyond architecture—where diverse perspectives, passion, and collaboration inspire creative solutions.

Education: Architectural degree from an accredited university or equivalent demonstrated proficiency.

Experience:

  • Applicant should be proficient in the coordination and modeling of complex projects in a Building Information Model (BIM) environment.
  • A minimum of five (5) years experience in production and coordination of documents in all phases of architectural practice with two (2) years experience with Autodesk Revit Architecture or three (3) years experience on another BIM platform is desired.
  • Familiarity with Autodesk Revit Structure, Revit MEP, Navisworks Manage, Ecotect, Green Build Studio and/ or Quantity Take Off is preferred.

To learn more about HMC Architects and to inquire about career opportunities, please apply online for this position at www.joinhmcarchitects.com. HMC offers very competitive compensation and excellent benefits. HMC is an Equal Opportunity Employer.

Friday, May 28, 2010

BIM Manager - Revit Structure - Los Angeles & San Francisco

Nabih Youssef & Associates, a leading structural engineering consulting firm, has an immediate opening for BIM MANAGERS with expertise in Autodesk REVIT Structure for a full time position in the Los Angeles & San Francisco offices. Experience in the latest versions of Autodesk Revit Structure and AutoCAD a must, certification in either will be a plus.


The successful candidate will be working in a fast-paced, dynamic environment on high-profile projects, must be team-oriented and meet the following requirements:
  • 5+ years of in-depth working knowledge, preferably in a BIM Management capacity, of current BIM/CAD software, mainly Autodesk Revit Structure, with emphasis on parametric family and object creation, model sharing, template formatting as well as model sharing and project sheet setup.
  • Must have production experience in structural and architectural design for buildings (residential & commercial), drafting or engineering.
  • Strong written and verbal communication skills with the ability to use time productively and maximize efficiency.
  • Excellent knowledge of AutoCAD, 3D Studio, Rhino, Google Earth, MS Office programs including Word, Excel and Outlook, web applications, FTP portals and database software.
Excellent growth opportunity, compensation and benefits package.

Please submit your resume with a personal cover letter and salary history to info@nyase.com.

Thursday, May 27, 2010

CAD/BIM Manager - Revit Specialist - California

Clive Wilkinson Architects seeks highly motivated, documentation-focused Revit specialists with 3+ years of experience. Qualified applicants must have expert level skills within the Revit platform and demonstrated Revit experience in the production of Construction Documents for large/complex commercial projects. A positive attitude and the ability to work within a team are essential.

To be considered for this position you must possess authorization to work within the United States, as well as residency in the Los Angeles area. Salary is commensurate with abilities and relevant experience.

We are a fast moving, design-focused practice looking to expand our talented team. With an international reputation in workplace design and strategy, the firm is now establishing itself in other design spheres, including ground-up construction, educational facilities, retail stores, and anything challenging we can get our hands on!


The office culture is highly collaborative, the work ethic highly professional, the spirit youthful and ambitious, and the opportunities great - as our blue chip client list attests. Past clients include the largest advertising agency in the world and the world's dominant internet services company, among others. Since your work is only as good as your clients - this matters!

If you meet the above requirements and like what you see on our website please email your resume and work samples with “Revit Specialist” in the subject line to careers@clivewilkinson.com.

Important: Please send PDFs only, 5MB or less. Paper applications, links to portfolio websites, or unsolicited phone calls will disqualify prospective candidates.

Revit Operator - Architecture - Texas

LMD Architects, PLLC is looking for a Revit operator to help them with their commercial (their primary focus), educational, and correctional work.


Naturally you need real Revit experience, their benchmark is set at 5+ years preferred. They are located in San Antonio, TX and compensation will be based on your experience and education.

Please send resumes and references to: Kara Fredrickson.

Project Revit Coordinator - DC

ZGF Architects LLP is a nationally recognized, award winning architecture firm that transforms the needs and aspirations of our clients into inventive, engaging built environments. We listen; we are collaborative and passionate about our work. We are focused on design quality. Design based on rigorous analytic processes and human understanding. Design that honors the unique qualities of its purpose and place, and that is environmentally responsible. Design that enriches and inspires people’s lives. Together with our clients, ZGF builds community.

At ZGF, our ability to deliver excellence is based on our ability to attract and retain creative people committed to quality design, innovation and professional growth within a team environment.


We seek a talented and motivated Revit expert to join our DC design team as Project Revit Coordinator. The successful candidate will be expected to lead the project team in the efficient use of Revit by helping to develop and disseminate project best practices. Focused on collaborating with professional and technical staff in Washington DC and NYC, the Project Revit Coordinator is part of a team supporting the use of BIM in design, sustainability and project efficiency firm wide. We encourage candidates with a minimum of 5 years experience managing large, multiphase, complex Revit projects to apply on our site. (http://careers.zgf.com/appl/ ) The firm provides a professional, creative, and supportive team environment.

ZGF is an Equal Opportunity Employer.

BIM Support Specialist - New York

Our Client (an award winning global design house) is looking for a BIM Support Specialist with a minimum of 5 years Revit experience. You will be responsible for daily administration and execution of BIM (AutoDesk Revit) within their headquarters in New York, additionally supporting their offices in Asia and London as needed. Overall responsibilities include implementing and reinforcing the firm’s BIM approach, and you will be involved with the entire setup and optimizing of Revit on projects, standards, developing the model strategy for the team, consultant interaction, and all software modifications and maintenance.

Training users in the application and BIM / Firmwide best practices will be important, as well as monitoring and maintaining project standards throughout New York as well as our other international offices. Skills developing and deploying custom design tools for the application will be important.

Essential experience:
  • Comfortable interacting with teams and staff members
  • Strong knowledge of Revit Architecture 2010-2011, including customization
  • Strong knowledge of AutoCAD 2010, including scripting and CUI
  • General IT and desktop support skills
  • Rendering technologies (MentalRay, vRay)
  • Exposure to Rhino with Grasshopper experience
  • Revit API/UI/AutoLISP
  • Familiarity with NavisWorks
If you are ambitious and can demonstrate a proven track record this is a great opportunity offering tremendous potential.

Contact Info:
kevin@uberCAD.com
Voice +44 (0) 1 275 349 000

Thursday, May 6, 2010

Revit Project Modeller

Eco Offsite is seeking a consultant or full-time employee to assist with design and construction projects using Revit in our office in San Jose, CA.

The ideal applicant:
  • 3-5 years experience with Revit
  • Production of Revit families
  • Quantity take-offs
  • Project documentation
  • Residential design/construction experience
  • Bachelor’s or Graduate degree in Architecture or Construction
If you are interested please contact Kathleen.

Revit Professional Seeks DFW Career

Kevin is an Autodesk Certified Professional in Revit 2010 who is looking for opportunities in North Texas, but is willing to consider relocation. He finished his Master of Architecture degree from Texas Tech University in 2008.

Experienced in:
  • Multi-story wood-frame student and multi-family housing (SD through CD - 6 total)
  • Commercial interiors (SD through CD - 2 total)
  • Interior shell finish-outs (SD through CD - 10 total)
  • Revit family creation (numerous in-office, one external family creation project)
  • Revit rendering and walkthrough animations for both in-office and external projects (small examples pictured)
  • In-office Revit tutorials and procedures training/development
  • Authorship of RFQ responses and other marketing materials
Sample Images:




Other software: DataCAD 10+, AutoCAD 2008, Adobe Photoshop & Illustrator CS.

Kevin is looking for a place where he can build a career and work towards other certifications & licensure while staying on the cutting edge of BIM technology. If you would like to learn more, please contact Kevin Kernaghan at

CAD/BIM Design Manager - Revit Specialist - NYC

We are seeking a CAD/BIM Design Manager REVIT specialist for a prestigious Acoustical & Audio Visual Engineering Firm in New York City.

In this position you will monitor the production efficiency of designers and CAD/BIM technicians, and continuously train the staff to utilize the most efficient CAD/BIM techniques.

ESSENTIAL DUTIES & TASKS
  • Demonstrate an excellent understanding of AutoCAD & REVIT and be adept at software implementation (firm wide/ multiple offices nationally), troubleshooting and resolving complex technical issues.
  • Provide production CAD support
  • Develop, implement and enforce CAD Standards
  • Organize the CAD environment
  • Supply technical support for all CAD software
  • Provide support for plotting and electronic file submissions
  • Interact on project standards coordination with clients
  • Insure CAD vendor management
  • Provide training and supervision of in-house CAD users
  • Generate written technology evaluations for future software adoption
  • Provide a budget for all CAD technology items
  • Maintain CAD document archive and retrieval for projects
  • Provide leadership and vision to the firm in the area of CAD
  • Train in-house support staff
  • Develop training budget and overall scope
  • Customization of CAD Programs
  • Maintain CAD Software inventory
  • Strategic Planning
  • Scheduling drawing completion
RELEVANT EXPERIENCE
  • 5 years minimum experience in a design technology as CAD/BIM Manager, CAD/BIM trainer or similar.
  • Relevant experience using AutoCAD or other CAD\BIM Platforms.
  • Experience with large institutional projects a plus.
  • Revit, MEP, or Structural project experience and knowledge or very strong knowledge of other BIM tools.

Contact:
Lauren Epstein
Account Executive
Forrest Solutions
212.204.1144
lepstein@forrestsolutions.com

Monday, April 26, 2010

Revit Project Designer is Looking for Opportunity

William is seeking an opportunity in Southern California but is open to other options.

Keeping it short and sweet:
  • Autocad/ Autodesk Revit Architecture
  • Proven experience with large & complex project delivery using Revit
  • Proven coordination process experience with MEP consultants
  • Bachelor of Architecture degree
Project Experience:
  • Residential
  • Retail
  • Education
  • Interiors
  • Hospitality
  • Tenant Improvements
If you'd like to learn more, please contact William Matian via EMAIL.

Monday, April 19, 2010

Project BIM Coordinator (NBBJ Seattle)

For more than 60 years, NBBJ—a leading international architecture and design firm—has successfully helped clients address the challenges of the rapidly changing marketplace. The firm is a leader in providing architecture, interior design and planning services in markets such as healthcare, retail and hospitality, education, workplace, government and science and technology. We are an organization of creative professionals committed to achieving design excellence and environmental stewardship in diverse projects in many cities across the world. NBBJ has ten offices worldwide in Boston, Columbus, Los Angeles, New York, San Francisco, Seattle, Beijing, Dubai, London and Shanghai.


NBBJ Seattle is seeking a studio-based Building Information Modeling (BIM) expert, to lead successful coordination of BIM production and coordination at a project level. The position will offer the candidate opportunities to grow within the firm and exposure to an innovative, fast-paced and highly collaborative environment.

Required Technical skills/attributes:
  • Minimum of seven (7) years experience in Architecture.
  • Expert level knowledge of Autodesk’s Revit Architecture.
  • Proven prior experience with large & complex project delivery using Revit.
  • In-depth knowledge of technology based collaboration systems.
  • Proven coordination process experience including working with consultants using multiple platforms.
  • Knowledge/experience with 3D Max or Rhino a plus.
  • Knowledge/experience in Navisworks a plus.
  • Bachelor of Architecture or equivalent degree required.
Required Personal skills/attributes:
  • Ability to work independently, and with minimal supervision.
  • Ability to Multi-task, work well under pressure and meet deadlines.
  • Communicate clearly
  • Overall, excellent communication skills.
Role and responsibilities:
  • Participate in BIM set-up, standards and coordination process.
  • Participate in technological collaboration between project team members, client, architect, builder, consultants, subcontractors etc.
  • Facilitate the streamlining of the process of exchange and coordination of the 3D model with consultants and contractor/fabricators.
  • Work directly with Design Technology Team (DT) regarding BIM process standards, technology support and training.
  • Establish early standards for data exchange with entire Project Team to optimize use of the BIM for scheduling, quantity take-off, estimating etc during all stages of the project.
  • Participate in BIM Coordination meetings.
  • Participate in constructability reviews of the BIM.
  • Establish/maintain project files and standards.
  • Develop, discover, collect, and share processes, best practices and techniques.
  • Lead the development of standard detail libraries of blocks, groups, curtainwall, casework, etc.
  • Actively promote advanced and innovative BIM-based methodologies towards integrated practice.
This position reports to and receives direction from the Project Manager and Studio Core Team. To apply please see our WEBSITE.

NBBJ is an equal opportunity employer.

Revit Modeller - Los Angeles

The Summit Group are looking for an in-house draftsperson who is proficient with Autodesk Image Modeler and Revit Architecture for residential remodeling projects.  The objective is to generate as-built 3D Models using 2D digital images and Image Modeler. These are then exported to Revit Architecture for construction documentation.  The ideal person must have residential remodeling background with conceptual and creative experience. Resumes, project samples and salary requirements should be e-mailed to below listed contact info for your review and consideration.

Michel Heyman
The Summit Group

Revit MEP - Electrical Designer - New Jersey

The recruiting firm McKeon-Grano Associates, Inc. represents an opportunity for a electrical designer who is also proficient with Revit MEP. They must be able to begin working in Revit without training. AutoCAD experience is also required, however Revit is the primary focus. Qualified candidates can submit their resume to Ed O'Shea preferably in Microsoft Word .doc format.

Revit MEP - HVAC - New Jersey

The recruiting firm McKeon-Grano Associates, Inc. represents an opportunity for a HVAC designer who is also proficient with Revit MEP. They must be able to begin working in Revit without training. AutoCAD experience is also required, however Revit is the primary focus. Qualified candidates can submit their resume to Ed O'Shea preferably in Microsoft Word .doc format.

Tuesday, April 13, 2010

Project BIM Coordinator - Shanghai

NBBJ is a global architecture, planning and design firm that helps companies and organizations create innovative places. NBBJ’s culture and design methods have attracted the attention of Fortune 500 companies, leading public and civic organizations worldwide and US News & World Report top hospitals. NBBJ is a leader in corporate, commercial mixed-use and urban design throughout Asia. Some of our recent built work in Asia includes the Microsoft Headquarters (Beijing), The Sail at Marine Bay (Singapore) and the Nuritkum Square (Seoul).


Current work on the boards includes the Hangzhou Olympic Stadium (Hangzhou, China), Suning Headquarters (Nanjing, China). The firm has a long-standing history of transformational designs and is dedicated to actively pursuing sustainable solutions that contribute to a more livable world. With over 650 professionals in five U.S. and four international offices, NBBJ consistently ranks among the U.S.’s top four and the world’s top 12 largest architectural firms.

NBBJ Shanghai is seeking a studio-based Building Information Modeling (BIM) and Revit expert, to lead successful coordination of BIM production and coordination at a project level. The position will offer the candidate opportunities to grow within the firm and exposure to an innovative, fast- paced and highly collaborative environment.

Required Technical Skills
  • Minimum of 5 years experience in architectural design or construction experience and/or a minimum 5 years experience overseeing BIM/CAD in an architectural/engineering setting.
  • Expert level knowledge of Autodesk’s Revit Architecture, with a minimum of 5 years experience providing beginner through advanced training in Autodesk’s Revit Architecture platform.
  • Possess a deep knowledge in the Autodesk product range, including Revit Architecture, Revit MEP, Navisworks, 3DSMax and associated workflows.
  • Experience with Autodesk related programming languages.
  • Proven coordination process experience.
  • Bachelor of Architecture or equivalent degree in design or engineering, preferred.
Required Personal Attributes
  • Ability to work independently, and with minimal supervision.
  • Ability to multi-task, work well under pressure and meet deadlines.
  • Excellent communication and presentation skills, in both English and Chinese (Mandarin).
  • Ability to collaborate effectively with local and/or remote personnel in order to provide fast and effective problem solving.
  • Must be a Shanghai resident or able to relocate to Shanghai.
Role and Responsibilities
  • Participate in project BIM set-up, standards and coordination process.
  • Participate in technological collaboration between project team members, client, architect, builder, consultants, subcontractors etc.
  • Work directly with firmwide NBBJ Design Technology Team (DT) regarding BIM process standards, technology support and training; attend monthly firmwide Design Technology meetings.
  • Act as primary point-of-contact between Information Technology (IT) and the Shanghai studio regarding optimal BIM workflows.
  • Establish early standards for data exchange with entire Project Team to optimize use of the BIM for scheduling, quantity take-off, estimating, etc., during all stages of the project.
  • Participate in project BIM coordination meetings and constructability reviews of the BIM.
  • Establish/maintain project files and standards.
  • Develop, discover, collect, and share processes, best practices and techniques.
  • Lead optimal project workflows/process development within the Shanghai studio.
  • Liaise with the studio-based Project BIM Leaders regarding all aspects of BIM and design technology.
  • Train project teams in the Autodesk product range including workflow advice and best practices.
This position reports to and receives direction from the Project Manager and Shanghai Studio Core Team.

Please email your resume and work samples to HRShanghai@nbbj.com. Physical copies must be mailed to:

Resource Plaza Suite 2101
Zhong Shan South Road No. 268
Shanghai, China

NBBJ is an equal opportunity employer.

Friday, April 9, 2010

Opportunity Wanted: Revit (BIM) Production - BIM Manager Track - NYC

Objective:
My immediate goal is to obtain a position to use and support Revit (BIM) for production. The ideal opportunity would provide a chance to transition to the role of BIM manager. My longer term goal is to pursue work in construction management and contract administration for the A/E/C industry. Toward that end I am currently halfway through a construction management program at New York University.

I have UNTAPPED potential and I am so confident that you’ll find I add value that I am prepared to work for up to two weeks FREE! Try before you buy!

Background:
I am US and foreign trained architect (licensed outside the USA and preparing for ARE) with diversified experience as a designer, project architect, bid evaluator, builder, estimator, supervisor, and a faculty member. In Ethiopia I worked alongside Italians as a project architect for a $120,000,000 cultural building complex. I was responsible for documenting shop drawings, redesigns and as-built drawings over four and half years. I reported to the project manager and I oversaw 4 senior draftsmen and 5 site foremen.

REVIT Experience:
  • Using Revit since 2007
  • HOK Houston - architectural technician for the $12.1 billion King Abdullah University of Science and Technology project (KAUST). Created design development and construction documentation.
  • Designed a research laboratory for graduate studio in Revit
  • Modeled a recreational building in Revit and exported it to 3Ds Max for rendering
Location:
Greater New York City area is preferred but I am willing to relocate elsewhere as I can complete my studies via the internet. If you'd like to learn more about me and to discuss an opportunity please send me an EMAIL.

Wednesday, March 31, 2010

BIM Manager - Manhattan - RicciGreene Associates

RicciGreene Associates is a architectural planning and design firm located in mid-town Manhattan. They have an immediate opportunity for a BIM Manager. The BIM Manager will be responsible for implementing REVIT firm wide (multiple offices nationally), will play a significant role in the day-to-day management of standards, training and development of new processes for working in 3-D, to supplement the design and documentation process.

The BIM Manager’s Primary Responsibilities include: Developing BIM standards, establishing drawing templates, Managing BIM/Autocad Software packages, provide in-house technical assistance and training. BIM Manager will also be responsible for managing/administering project Buzzsaw web-sites.

Minimum Requirements

  • B./M.Arch or B.S. in Architecture, Engineering or similar Construction related discipline.
  • Experience with large institutional projects a plus.
  • 3 years minimum experience in a design technology role such as CAD/BIM Manager, CAD/BIM trainer or similar.
  • Revit Architecture, MEP, or Structural project experience and knowledge or very strong knowledge of other BIM tools.
  • Knowledge of Buzzsaw and/or other web-based project management tools.

Benefits

  • Medical & Dental Insurance
  • Paid Time Off (Vacation, Holiday, etc.)
  • 401(k) Plan
  • Direct Deposit

For immediate consideration please send resume to via email to Lisa Tsang at lisat@riccigreene.com.